| TYPE 925 多功能供應歧管 |
| Process reliable and field rugged |
|
|
| Now there's a compact I/P transducer that delivers reliable high performance for the toughest applications in the most hazardous environments: the T950XP from ControlAir.The 950XP converts an electrical current signal to a stable, pneumatic output to actuate valves. Its NEMA 4X (IP65) housing is designed for both Intrinsically Safe* and Explosion-Proof* operation. Advanced circuitry includes electronic feedback control for superior vibration protection and highly accurate output. With flow rates up to 12 SCFM(20m3/hr), the 950XP has the muscle to drive large valves and actuators. Yet because it typically consumes only .05 SCFM (0.11m3/hr), it not only costs less to buy, it costs less to operate as well. And because it takes impure air in stride, downtime is reduced, too. The 950XP gives you big flexibility. Its small footprint can fit into tight spots. Its standard mounting bracket lets you mount it directly on a valve, wall, panel, or pipe. Optional, field-selectable process output ranges reduce downtime and inventory. And since the 950XP is position insensitive, it gives you even more freedom in mounting and connecting to valves and instruments. As a result of this flexibility, installation goes faster. Easy access Zero and Span adjustments make bench or field calibration quick and easy. For operating versatility, you may choose direct, reverse, and split range modes. |
| 技術資料訂購 |
|
|
規格
| 更多詳情，請訪問我們的官方網站：www.controlair.com.cn |
|
或者是致電：18611155599（于先生） |
|
或者是： |
|
詳情請咨詢http://www.controlair.com.cn |
|
電話：010-56205577 18611155599(于先生) |
|
郵箱：controlair@126.com |
功能規格
| 輸入 |
4-20 mA |
| 輸出 |
3-15 psig 0.20-1.00 BAR
3-27 psig 0.20-1.80 BAR
6-30 psig 0.40-2.00 BAR |
| 耗氣量 |
在中檔3.0 SCFH（0.11 m3/hr） |
| 供應壓力 |
100 psig (7.0 BAR) 最大
Note: Supply pressure must be a minimum of 5 psig above maximum output
|
| 流通能力 |
4.5 SCFM (7.6 m3/hr) 在 25 psig
(1.7 BAR) 供應
12 SCFM (20.0m3/hr)在100 psig
(7.0 BAR) 供應 |
| 溫度限制 |
工作溫度：-40°C至+160°F（-40℃至+71℃）
存儲溫度：-40°C至+200°F（-40℃至+93°C） |
| 循環負載，I/P傳感器 |
7.5 VDC @ 20 mA |
| 阻力 |
260 Ohms @ 70°F |
| 操作模式 |
直接，反向或分割的范圍 |
性能規格
準確性，
遲滯，
重復性 |
± 0.10% 域值 |
| 盲區 |
0.02%域值 |
| 位置效應 |
沒有明顯的效果 |
| 振動效應 |
小于±1％的跨度，在下列情況下：5-15 Hz@0.8英寸，恒位移;15-500赫茲10g的 |
| 供應壓力的影響 |
沒有明顯的效果 |
| 溫度效應 |
±0.045%/°F (0.07%/°C)域值 |
| 反向極性效應 |
沒有正常供電電流逆轉的破壞
（4-20 mA）或誤高達60 mA的 |
| RFI-EMI效應 |
跨度每EN61000-4-3輸出壓力的變化：1998年，修訂1，性能標準A小于0.5％ |
物理規格
| 接口尺寸 |
氣動1/4" NPT
電動1/2" NPT |
| 介質 |
清潔，干燥，無油，空氣過濾至40微米 |
| 安裝方式 |
直壁，面板，或2“管道（可選） |
| 材料 |
外殼：鉻酸鹽處理的環氧樹脂烤漆鋁。符合NEMA 4X（IP65）。
密封：丁腈橡膠
修剪：不銹鋼，黃銅，鍍鋅鋼
|
| 重量 |
1.8 lbs (.82kg) |
|
| 訂購信息 |
電氣轉換器又被稱作電氣比例閥，電流壓力變換器，電壓-壓力變換器，I/P、E/P轉換器，比例閥 |
更多詳情，請訪問我們的官方網站：www.controlair.com.cn
或者是致電：18611155599（于先生）
或者是：
詳情請咨詢http://www.controlair.com.cn
電話：010-56205577 18611155599(于先生)
郵箱：controlair@126.com
點擊圖片查看原圖
